B – 16
16026923
© 2006 Maytag Services
Use & Care
Tones (beeps)
The number of beeps heard at the end of cooking and at the
end of timer operation and their volume can be adjusted.
To adjust the beeps:
1. Press
Setup
pad.
2. Use the arrow to scroll.
3. Select
TONES
.
To change the beeps at the end of cooking:
1. Follow “Tones” steps 1-3 (see above).
2. Select
COOK TONE
.
3. Use the arrow to scroll.
4. Select
1-30 MIN
to hear one beep every thirty seconds.
OR
Select
1-60 MIN
to hear one beep every sixty seconds.
OR
Select
1 BEEP
to hear one beep only at the end of cooking.
5. Press the
Setup
pad to exit.
To change the timer beeps:
1. Follow “Tones” steps 1-3 (see above).
2. Select
TIMERS TONES
.
3. Use the arrow to scroll.
4. Select
2-30 SEC
to hear two beeps every thirty seconds.
OR
Select
2-60 SEC
to hear two beeps every sixty seconds.
OR
Select
1 BEEP
to hear one beep only at the end of the
set time.
5. Press the
Setup
pad to exit.
To change the volume of the beeps:
1. Follow “Tones” steps 1-3 (see above).
2. Press the arrow to scroll.
3. Select
VOLUME
.
4. Select
HIGH
for the highest volume.
OR
Select
MEDIUM
for medium volume.
OR
Select
LOW
for the lowest volume.
5. Press the
Setup
pad to exit.
12 HR Shutoff
The oven will automatically turn off at the end of 12 hours if
you accidentally leave it on.
To turn off this feature:
1. Press
Setup
pad.
2. Use the arrow to scroll.
3. Select
12HR SHUTOFF
.
3. Select
ON
or
OFF
using the Quickset pads.
4. Press the
Setup
pad to exit.
Energy Saver
To save energy, the display can be set to go dark if it is not
being used.
To set the Energy Saver feature:
1. Press
Setup
pad.
2. Use the arrow to scroll.
3. Select
ENERGY SAVER
.
4. Select
ON
or
OFF
using the Quickset pads.
5. Press the
Setup
pad to exit.
Press any pad to “wake up” the display.
Service
This area of the oven control displays the Jenn-Air Customer
Service toll-free phone number.
1. Press
Setup
pad.
2. Use the arrow to scroll.
3. Select
SERVICE
.
4. Press the
Setup
pad to exit.
Demo
When Demo is selected, you will see a short presentation
highlighting the features of your new Jenn-Air range.
1. Press
Setup
pad.
2. Use the arrow to scroll.
3. Select
DEMO
.
4. Select
ON
or
OFF
using the Quickset pads.
5. Press the
Setup
pad to exit.