13
4.
Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into gas opening and press down onto the
gas orifice spud, and remove by turning the gas orifice spud
counterclockwise and lifting out. Set gas orifice spud aside.
5.
Replace with correct LP gas orifice spud. See the “LP Gas
Orifice Spud/Hood Chart.”
Burner orifice spud
Use the following chart to find the exact orifice spud
placement.
Fully insert choke into bottom of medium burner base.
Choke should snap into place. Refer to illustration to
verify that choke is fully seated.
NOTE:
Chokes are placed on medium burners only.
LP Gas Orifice Spud/Hood Chart
Burner
Rating
Color
Size
Burner Style
3,000 BTUs
Blue
0.55 mm Small burners
11,000 BTUs Yellow
0.97 mm Medium burners
14,000 BTUs Red/Green
Green
1.05 mm
0.35 mm
Large burner - main
Large burner - simmer
6.
Place Natural gas orifice spuds in plastic parts bag for future
use and keep with package containing literature.
NOTE:
There may be extra orifices in your kit.
7.
Replace the burner base.
8.
Replace burner cap.
9.
Repeat steps 2 through 8 for the remaining burners.
10.
Unplug cooktop or disconnect power.
11.
Remove the control knobs.
12.
Pull cooktop forward to expose the control console screws
on the side of the cooktop burner base.
13.
Remove the 2 screws on each side of the cooktop burner
base that hold the control console in place.
14.
Disconnect wiring from the control console.
On Griddle Models:
Support the control console in the middle with one arm and
disconnect the griddle switch connectors and the grill
indicator light with the other hand.
15.
Remove console and set aside.
16.
Remove the round gasket from the valve stem.
17.
Use a
1
/
8
" x 4
1
/
4
" flat-blade screwdriver to completely screw
down all burner screws.
18.
Replace the round gasket.
19.
Reinstall the control console. Support the control console in
the middle with one arm and reconnect the griddle switch
connectors and/or grill indicator light connector.
A
A. Size stamp or color
Incorrectly seated choke
Correctly seated choke
A
B
C
Choke
A
A. Console attachment screws
A
B
A. Griddle switch connectors
B. Grill indicator light connector
A
B
A. Single flame burner adjustment screw (on right side of valve)
B. Dual flame burner adjustment screw (on left side of valve)
