background image

43

Connected Appliance Regulatory Notices (cont.)

Open Source License Usage

The following statements refer to the portions of this software 

based in part on FreeRTOS v7.0.2, http://

www.freertos.org

.  

The use of this software is governed by the terms of GNU 

General Public License v. 2, which is available at: 

http://

www.gnu.org/licenses/gpl-2.0.html

. A copy of the source 

code may be obtained by written request for the software by 

name to 

[email protected]

, along with the address  

for delivery.
The following statements refer to those portions  

of the software copyrighted by Eclipse Foundation, Inc.  

Copyright (c) 2007, Eclipse Foundation, Inc. and its licensors. 

All rights reserved.
Redistribution and use in source and binary forms, with or 

without modification, are permitted provided that the following 

conditions are met:
•   Redistributions of source code must retain the above  

copyright notice, this list of conditions, and the following 

disclaimer.

•   Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions, and the following 

disclaimer in the documentation and/or other materials 

provided with the distribution.

•   Neither the name of the Eclipse Foundation, Inc. nor the 

names of its contributors may be used to endorse or promote 

products derived from this software without specific prior 

written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT  

HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS  

OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  

IN NO EVENT SHALL THE COPYRIGHT OWNER OR  

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  

DAMAGES (INCLUDING, BUT NOT LIMITED TO, 

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY  

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,  

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions of this software are copyright (c) Sawtooth Consulting 

Ltd. 2006-2015 All rights reserved.
Portions of this software are copyright (c) Arrayent, Inc.  

2015 All rights reserved.

The following statements refer to those portions of the software 

copyrighted by Swedish Institute of Computer Science.
Copyright (c) 2001-2004 Swedish Institute of Computer Science. 

All rights reserved.
Redistribution and use in source and binary forms, with or 

without modification, are permitted provided that the following 

conditions are met:
1.    Redistributions of source code must retain the above 

copyright notice, this list of conditions, and the following 

disclaimer.

2.   Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions, and the following 

disclaimer in the documentation and/or other materials 

provided with the distribution.

3.   The name of the author may not be used to endorse or 

promote products derived from this software without specific 

prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS”’ 

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 

AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 

AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGE.
The following statements refer to those portions  

of the software copyrighted by Marvell International Ltd. 

Copyright (c) Marvell International Ltd. 

All rights reserved.

DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE 

COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”  

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 

COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY  

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,  

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Summary of Contents for JFFCC72EHL01














































Reviews: