background image

41

If you experience

Possible Causes

Solution

The doors will not close 

completely.

The door is blocked open.

Move food packages away from door.

A bin or shelf is in the way.

Push bin or shelf back into the correct position.

Recently installed

Remove all packaging materials.

The doors are difficult  

to open.

The door gaskets are dirty or sticky.

Clean gaskets and contact surfaces with mild soap and warm 

water. Rinse and dry with soft cloth.

The doors appear to be 

uneven.

The doors need to be aligned or the 

refrigerator needs to be leveled.

See the “Refrigerator Leveling and Door Closing” section.

The refrigerator is 

unsteady or it rolls 

forward when opening 

and closing doors.

The refrigerator brake feet are not 

snug against the floor.

Remove the base grille. Turn both brake feet (1 on each side) 

clockwise, the same amount, until they are snug against the floor. 

See the “Refrigerator Leveling and Door Closing” section.

WARNING

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

To view an animation showing how to adjust and align the doors, refer to the Product Help/FAQ section of the brand website and 

search for “Refrigerator Leveling and Door Closing.”

First try the solutions suggested here or visit our website at 

www.jennair.custhelp.com

.

TROUBLESHOOTING

If you experience

Possible Causes

Solution

Ice and Water (cont.)

Crushed or cubed ice 

misses the glass when 

dispensing ice.

The glass is not held close enough to 

where the ice exits the chute. 

Hold the glass close to where the ice exits the chute.

Water from the dispenser 

is warm.

Water from the dispenser is chilled to 

50°F (10°C).

This is normal.

The refrigerator has just been 

installed.

Allow 24 hours after installation for the water supply to cool 

completely.

A large amount of water was recently 

dispensed.

Allow 3 hours for the water supply to cool completely.

Water has not been recently 

dispensed.

The first glass of water may not be cool. Discard the first glass  

of water dispensed.

The refrigerator is not connected to  

a cold water pipe.

Make sure the refrigerator is connected to a cold water pipe.  

See the “Water Supply Requirements” section.

Doors

Summary of Contents for JFFCC72EHL01














































Reviews: