11
Plug in Grill
1. Plug extension cord into grounded 3-prong GFI outlet.
■
To avoid electrical shock, do not immerse cord or plugs in
water or other liquid.
■
Unplug from the outlet when not in use and before
cleaning. Allow to cool before putting on or taking off
parts.
■
Do not operate any outdoor cooking gas appliance with a
damaged cord, damaged plug, or after the appliance
malfunctions or has been damaged in any manner.
Contact the manufacturer for repair.
■
Do not let the cord hang over the edge of a table or touch
hot surfaces.
■
Do not use an outdoor cooking appliance for purposes
other than intended.
■
When connecting, first connect plug to the outdoor
cooking gas appliance then plug appliance into the outlet.
■
Use only a Ground Fault Interrupter (GFI) protected circuit
with this outdoor cooking gas appliance.
■
Do not remove the ground prong or use with an adapter
of 2 prongs.
■
Use only extension cords with a 3 prong grounding plug
rated for the power of the equipment and approved for
outdoor use with a W-A marking.
2. Go to “Check and Adjust the Burners” section
GAS CONVERSIONS
Tools and Parts for Gas Conversion
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed for conversion to Natural gas
Parts supplied for conversion to Natural gas
■
Natural gas orifices
Parts neeeded for conversion to Natural gas
■
Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
■
Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator”)
■
10 ft (3.0 m) Natural gas hose with quick connector
■
5.9" (150 mm) Natural gas regulator hose
■
6 mm nut driver
■
6 mm wrench
■
Allen key
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the appliance prior to disconnecting the electrical
power.
Conversion from LP Gas to Natural Gas
Installation of the regulator
1. Turn off the main gas supply valve.
2. Unplug grill or disconnect power.
3. Disconnect 20 lb LP gas fuel tank (if present).
4. Turn off all burner control valves.
5. Remove the 20 lb LP gas fuel tank (if present) from the grill
cart.
A. 3-prong ground plug
B. 3-prong polarized type outdoor GFI outlet
C. Ground prong
Electrical Shock Hazard
Use only a UL listed, 14 gauge, 3 wire extension cord
approved for outdoor use, marked W-A, with a
maximum length of 50 ft.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A
B
C
■
Phillips screwdriver
■
Pipe wrench
■
Adjustable wrench
■
6 mm socket and wrench
or 6 mm nut driver
■
Thin flat-blade screwdriver
■
Pliers
■
Pipe thread sealant
certified for LP gas
WARNING
Explosion Hazard
Use a new CSA International approved “outdoor”
gas supply line.
Securely tighten all gas connections.
Failure to do so can result in death, explosion, or fire.
Summary of Contents for FREESTANDING OUTDOOR GRILLS
Page 28: ...28 REPLACEMENT PARTS...
Page 59: ...59 PIEZAS DE REPUESTO...
Page 91: ...91 PI CES DE RECHANGE...
