7
Style 2 - Overlay
Drawer Width Dimensions
Style 1- Euro Series
Style 2 - Overlay
Custom Overlay Drawer Panels
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■
The thickness of the overlay panels must be
³⁄₄
" (19.05 mm).
■
To avoid damage to the drawers, each overlay panel must not
weigh more than 10 lbs (4.5 kg).
■
Do not exceed the height dimension for the overlay panels.
Panels that exceed the height dimension may damage the
refrigerator drawers, cabinets or countertop.
■
The width of the overlay panels may vary according to the
width of the cabinet opening.
Top and Bottom Overlay Drawer Panel Dimensions
INSTALLATION INSTRUCTIONS
Unpack the Refrigerator Drawers
Remove the Packaging
Remove tape and glue residue from surfaces before turning on
the refrigerator drawers. Rub a small amount of liquid dish soap
over the glue residue with your fingers. Wipe with warm water and
dry. Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator drawers.
Properly dispose of packaging.
17
¹⁄₄
"
(43.8 cm)
22
¹⁄₂
"
(57.2 cm)
23
⁵⁄₈
"
(60.0 cm)
23
³⁄₄
"
(60.4 cm)
24
³⁄₄
"
(60.4 cm)
27
¹⁄₈
"
(68.9 cm)
23
⁵⁄₈
"
(60.0 cm)
23
³⁄₄
"
(60.4 cm)
22
¹⁄₂
"
(57.1 cm)
24
¹⁄₈
"
(61.2 cm)
A. Overlay hook locations
B. Rout
¹⁄₈
" (3.18 mm) deep.
Reverse Side
23
⁵⁄₈
"
(60.0 cm)
14
⁷⁄₈
"
(37.8 cm)
¹⁵⁄₁₆
" (2.4 cm)
4
¹⁄₈
"
(10.5 cm)
¹³⁄₁₆
"
(2.1 cm)
2
³⁄₁₆
"
(5.6 cm)
¹³⁄₁₆
"
(2.1 cm)
A
¹⁵⁄₁₆
"
(2.4 cm)
1
³⁄₄
"
(4.4 cm)
R
¹⁄₁₆
"
(1.6 mm)
min.
B
Pilot Holes
¹⁄₁₆
" (1.6 mm) diameter x
³⁄₈
" (9.5 mm) deep
8 places
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator drawer(s).
Failure to do so can result in back or other injury.
