23
USING THE SIDE BURNER
Inspect the gas supply hose prior to turning on the
gas. If there is evidence of cuts, wear or abrasion, it
must be replaced prior to use. Do not use the side
burner if gas odor is present.
WARNING
When lighting, always keep your face and body as
far away from the burner as possible.
LIGHTING INSTRUCTIONS
1.
Open the top cover or lid. Remove any cooking
utensils that are near the burner grate.
2.
Turn the control knob counterclockwise to
the “IGNITE/HI” setting and then push the control
knob in. You should hear a “clicking” sound if the
electronic ignition system is working properly.
3.
If the burner does not light within 4 seconds,
turn the control knob to the “OFF” position.
4. If the smell of gas is detected and
the igniter is not functioning,
immediately turn the control knob to the
“OFF” position.
5.
Allow 5 minutes for any
accumulated gas to dissipate. If the
side burner igniter will not function,
follow the match lighting instructions
below.
MATCH LIGHTING
1.
Insert a match into the lighting rod.
Ignite the match and place near the
side burner ports.
2. Turn the control knob
counterclockwise to the “IGNITE / HI”
setting. The side burner should light
immediately.
3. Rotate the control knob to the
desired setting.
SIDE BURNER IGNITER WIRE ASSEMBLY
The side burner igniter wire is pre-assembled. If you find it loose, please follow the assembly instructions
below.
1. Connect the side burner igniter wire to the side burner gas valve as shown in figure 1.
Figure 1
2. Push and turn the side burner control knob to “IGNITE/HI”. Look for a spark at the side burner igniter under
the cooking grid to make sure the connection is good.
Figure 2
