22
5. Use a screwdriver to loosen the two
screws locking the bulb. Pull out the light
bulb and replace with a new bulb.
6. Reverse the instruction from steps 5-1 for
installation.
Cleaning Method
Follow steps 1-4 above for glass cover removal. Use a damp towel to
clean the surface of glass cover. Make sure the glass cover is completely
dry before re-installing.
WARNING
Make sure the light switch is on “OFF” position and power plug is disconnected from power
outlet prior to cleaning the glass cover.
.
WARNING
The light glass cover should not be in contact with water or any other liquid when it’s warm.
Sudden change of temperature may cause cracks on glass cover.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 watts per bulb
Voltage: 12 volts
Please contact customer service at 1-800-554-5799 for assistance on bulb replacement
information.
WARNING
To ensure continued protection against electric shock:
1. Connect to properly grounded outlets only.
2. Do not expose to rain.
3. Keep extension cord connections dry and off the ground.
