20
(KCL). Dissolve in 1000 ml of distilled water.
[Note:
You can store the unused portion of the standard
solution in a plastic container for six months but the air space
between the cap and the solution must be kept to an absolute
minimum. Storing the excess solution below 4
℃
can increase
the storage life. If you have any doubt of the accuracy of the
stored solution, a fresh batch should be prepared.
]
APP NAVIGATION
A. App Functions
The 6377MB/6377BEU is a Multi parameter pH/ORP/
conductivity/salinity/TDS/temperature
Bluetooth
benchtop
meter with iOS and Android apps for tablets. Functions of the
App includes, graphing, guided calibration procedures, data
storage and data sharing. Basic functionality of a pH/ORP/
conductivity/salinity/TDS/temperature benchtop meter such as
taking measurements, calibration and storing data can be
performed on the meter or on the paired tablets.
B. App Download and Installation
Download the companion App for the 6377MB/6377BEU from
the Apple Store or Google Play Store. Continue to the next
step after the correct App is installed to the tablets.
C. Connecting the Meter with the App
1. Prepare the 6377MB/6377BEU for Bluetooth connection.
Press the
“Power/BLE”
key for 2 seconds to turn on the
6377MB/6377BEU device. Press the
"Mode"
key to go to the
measure mode. Press and release the
“Power/BLE”
Key
again to turn on the 6377MB/6377BEU Bluetooth connection.
The Bluetooth light on the 6377MB/6377BEU will fast blink and
it is ready for Bluetooth connection.
2. Pair the 6377MB/6377BEU to the tablet.
a. Tap the “Settings” tab at the lower right of the App screen.
b. Tap the “Pair” button.
c. The tablet will search for any JENCO Bluetooth devices
within close proximity. When the App discovers and displays
the 6377MB/6377BEU, tap the “Connect” button.
