Jema JM-988, Manual Book

Page: 13 / 18

12
Fig.21 Before the sensor is installed
Fig.22 After the sensor is installed
Proper position for installation of Vice button feeder sensor
Installation method:
Stepped on the pedal at the backward, move the sensor to make the lamp go out. tighten the screw
.
Fig.(21) (22)
First install the sensor fixing rack
,
then install needle protection sensor
.
Fig.19 After the 373D sensor is installed
Installation method:
of the button attaching machine Fig. 17, then push the wire aside, connect the button feeding
sensor of the feeder with the wiper signal cable, then insert jack. See Fig. (19)( 20).
Installation method: Before installing, find out the trimming electromagnet
Fig.20 After the 373D sensor is installed