8
SERVICE OF MACHINES
TOOLS AND THINGS:
For successful servicing of a machine you will need some basic tools which are in good working order
and the right size for the job. Other tools / equipment are available for specific jobs but in most cases these are
not needed for general service.
Equipment needed:
Screwdrivers
Pozidrive, size 1 and 2
Flat tip, size small and medium
Wrenches
7mm
12mm x2
Pliers
Needle Nose, small
Wire Cutters, small
Digital Multi Meter (With ability to measure mV)
Additional Items / recommended:
Cable Ties (
p/n 13104000
)
Silicone Sealant
JEM Calibration Box (
p/n 92620005
)
Paper towels (or other absorbent material)
Ammeter (For measuring current draw of machine – could be handheld or bench mounted)
Epsilon 5 Portable ISP Programmer
(p/n 50502004)
Common Sense!!
WARNING – MAINS VOLTAGE
DISCONNECT FROM MAINS SUPPLY
BEFORE REMOVING COVERS
AND SERVICING THIS MACHINE
PROCEED WITH EXTREME CAUTION
Summary of Contents for AF-2
Page 1: ......
Page 9: ...9 AF 2 MACHINE OVERVIEW The Outside 3 PIN DMX REMOTE INPUT SOCKET MAINS INPUT 5 PIN DMX ...
Page 20: ......
Page 21: ......
