jeiko JKR1120, Instruction Manual

Page: 20 / 28

3. If using the 9V camera power adapter, just connect power jack. Make sure the Camera is
positioned no more than 5 1/2 feet from an AC power outlet.
4. Each camera’s channel number can be set by user, screw the lens part of camera to open the
lens cover, and then could set the camera’s channel number. After finish setting the channel,
screw the lens cover on.
CAMERA 1 S
SLIDE SWITCH
'
1 2
O N
1 2
O N
1 2
O N
CAMERA 3 S
SLIDE SWITCH
'
CAMERA 2 S
SLIDE SWITCH
'
5. The Camera (Transmitter) installation is now complete.
NIGHT VISION ///
The Camera includes IR LEDs, which allows viewing up to 18 feet in the dark when used with the
adapter. It can automatically turn to night vision in low light.
SETTING UP THE RECEIVER
1. Connect one end of the cable to the back of the receiver, the another end (RCA cord) to your
television's A/V inputs, the yellow plug to the VIDEO IN jack and the white plug to the AUDIO IN
jack.
2. Plug the receiver power adapter into the 9V DC power jack on the back of the receiver and plug
the power adapter into power outlet.
3. Place the receiver either on top or near to your TV. Rotate the antenna to a vertical position.
OPTIMIZING THE WIRELESS CAMERA SYSTEM
The 2.4GHz video signals pass easily through your home’s interior walls, but the signal may be
reflected by power wires or plumbing inside the wall. Usually a slight adjustment of the Receiver
and/or Camera antenna will improve reception. Take care not to force the antennas past their lock
positions. The most common source of interference are microwave ovens. Try to avoid mounting the
Receiver near a microwave oven or other source of RF interference such as cordless phones. To
avoid the interference from camera, we recommend you set your WiFi at channel 10.
MULTI-CAMERA OPERATION
Our wireless 2.4GHz Micro Cam system is designed to work with up to 3 Cameras. Additional
Cameras (With different shapes for your option) are sold separately.
IMPORTANT: When using more than one Camera, please check channel number on
package or the metal case of camera, make sure it is exclusive to each camera.
Accordingly the dip switch located on the back of the Receiver should be adjusted to reflect
the
channels in use.
4