Minibeast Cordless
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions is prohibited.
6
2. SAFETY PRECAUTIONS
1.
Before use, read this Operator’s Manual and complete training in occupational
safety and health.
2. Use only in
applications specified in this Operator’s Manual.
3. Keep the machine and the battery away from children.
4. Keep the machine and the battery dry. Do not expose the machine to rain, snow,
or frost.
5. Do not expose the machine and the battery to fire or excessive temperature.
6.
Set the MAGNET switch to ‘O’ before you install the battery and before you
move the machine. Use the carrying handle to move the machine.
7. Keep untrained people away from the machine.
8. Before each use, ensure the correct condition of the machine, battery, and tools.
Make sure that the machine has all parts, and they are genuine, undamaged
and correctly installed.
9. Make sure to maintain correct conditions that may influence the operation of the
machine.
10. Do not stay below the machine that is put at heights.
11. Keep the work area well-lit, clean, and free of obstacles.
12. Make sure that the tool is correctly attached. Remove items from the work area
before you turn on the machine.
13. Do not use tools that are dull or damaged.
14. Remove the battery before you install or remove tools. Use protective gloves to
install and remove tools.
15. Remove the battery before you manually turn the spindle.
16. Do not remove the battery during operation of the machine.
17. Use annular cutters without the pilot pin only when you drill incomplete through
holes.
18. Drill with the chip guard lowered.
19. Do not drill/machine holes which diameter or depth differ from those specified
in the technical data.
20. Do not use in explosive environments or near flammable materials.
21. Do not use on surfaces that are rough, not flat, not rigid, or are covered with
rust, paint, chips, or dirt.
