Assembly instruction
Status: 06.05.2022
Art.- No. 65740
Mercedes Sprinter
W907 / W910
from 2018, Cab System
JEHNERT Sound Design | Im Michelreis 14 | D-72124 Pliezhausen | Tel. 07127 / 93457-0 | Fax 07127 / 93457-10 | [email protected] | www.jehnert.de
•
Clip the tweeter cover strips back in place and tighten the screw on the outside (see Fig. H).
•
Mount original HT cover (see Fig. I)
•
Place the mid-high module on the discard tray and connect the tweeter and mid-range driver so
that they are short-circuit-proof (see Fig. J).
G
2.3 Mounting the mid-high modules in the dashboard
(only suitable for vehicles with storage compartment without cover fl ap)
H
I
•
When the cables have been properly routed through the hole (no excessive tension) insert both screws of the cupholder storage
compartment and tighten them (see fi g. F/G)
F
J
