Assembly instruction
Status: 06.05.2022
Art.- No. 65740
Mercedes Sprinter
W907 / W910
from 2018, Cab System
JEHNERT Sound Design | Im Michelreis 14 | D-72124 Pliezhausen | Tel. 07127 / 93457-0 | Fax 07127 / 93457-10 | [email protected] | www.jehnert.de
2.2 Assembly of the crossovers
•
Wrap mid-high crossover in damping fl eece (see Fig. A).
•
Place crossover in indentation of storage compartment and route tweeter connection through original tweeter hole and
connect with cable (see Fig. C and D).
•
Drill a 10 mm hole in the center of the cupholder/storage compartment ->ideally use a step drill.
•
Feed the midrange and tweeter speaker cables from below through the drilled hole and check the position of the storage com-
partment.
•
(see fi g. E)
A
B
D
C
E
