NOTES OR PREVENTIVE MEASURES
Environment
The machine can perform in environments with no more than 90% humidity.
Ambient temperature needs to be between 50 and 104 degrees Fahrenheit.
Do not use the machine in environments with conductive dust or corrosive gas in the air.
Avoid gas welding in areas of strong airflow.
Safety
The welding machine has protection circuitry for over voltage/current and heat. When voltage and output
current or the temperature of the machine exceeds the acceptable range the machine will shut down
automatically to prevent these conditions from causing damage.
The work area needs to be adequately ventilated!
Make sure the intake is not blocked or covered, for best performance and longevity of the
machine make sure there is adequate ventilation.
Do not exceed allowable range!
The automatic compensation circuit for voltage will insure that welding current is kept within the
allowable range. If voltage exceeds the allowable range, it could cause damaged to components
of the machine. The operator should understand the situation and take preventive measures.
If welding time has exceeded the duty cycle, the machine will shut down automatically to prevent
damage caused by overheating. If this happens
leave the machine turned on
, which allows the
cooling fan to run. Once the machine reaches a safe operating temperature the malfunction
indicator light will go out and the machine will work as normal again.
1-800-345-4545 jegs.com
7
