Jefferson JEFARIVT02H, User Manual

Page: 5 / 16

5
USER MANUAL
v1.1
JEFARIVT02H
AIR-HYDRAULIC BLIND RIVETER
www.jeffersontools.com
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety
precautions and warnings in this Instruction Manual before operating or maintaining this
equipment. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing the appropriate safety procedures. Never use
this equipment or modify it in any way that has not been specifically recommended by the
manufacturer.
GENERAL EQUIPMENT SAFETY
•
Familiarise yourself with the use, application and potential hazards associated with this equipment before use .
•
Ensure all Health & Safety regulations are adhered to when using this equipment.
•
Ensure that the riveter is operated by a capable and responsible person who is familiar with the user guidelines.
•
Never operate the riveter when you are tired or under the influence of alcohol, drugs or intoxicating medication.
•
Disconnect the riveter from the air supply before changing accessories, servicing or performing any maintenance.
•
Ensure that the equipment is well-maintained and kept clean condition.
•
Check equipment condition prior to use. Replace or repair damaged parts before use. Use Jefferson approved
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
•
Only use in a suitable working environment. Keep the area free from unrelated materials and ensure that there is
adequate lighting. Do not operate near children or animals.
•
Always wear approved eye (or face) and hand protection when operating the riveter.
•
Maintain correct balance and footing at all times. Do not over reach, ensure the floor is not slippery, wear non-
slip shoes.
•
Keep the air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that
all connections are secure before use.
•
Remove ill fitting clothing, ties, watches, rings, loose jewellery before use. Contain or tie back long hair.
•
Wear appropriate protective clothing and keep hands and body clear of working parts.
•
Keep the riveter away from your body and at a safe distance from others.
•
Secure any non-stable workpieces with a clamp, vice or other adequate holding device.
•
Ensure that spent rivet stems are disposed of correctly and do not cause a hazard.
•
Ensure correct air pressure is maintained and not exceeded (check specifications).
•
The recommended working pressure for the riveter is 85-90psi.
•
Avoid unintentional starting.
•
Never use the riveter for a task it is not designed to perform.
•
This tool is designed for riveting metal, primarily in workshops and garages. We do not recommend any other
use. Do not modify the equipment for other uses or try to enhance beyond its capacity.
•
Do not operate the riveter if any parts are damaged or missing as this may cause failure and/or personal injury.
•
Never carry the riveter by the hose, or pull the hose from the air supply.
•
Do not use the riveter in wet or damp environments or areas where there is heavy condensation.
•
Never direct air from the air hose at yourself or others.
•
When not in use, disconnect from the air supply and store in a safe, dry, childproof location.
WARNING:
No responsibility is accepted for incorrect use of this equipment. Incorrect use can result in damage to the equipment
and danger to the user. Warranty will be void in the event of incorrect use. The warnings, cautions and instructions
discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.