Jefferson Tools, Herons Way, Chester Business Park, Chester, CH4 9QR, United Kingdom
T:
+44 (0) 1244 646 048
F:
+44 (0) 01244 360 314
E:
www.jeffersontools.com
Do not modify the construction or design of the tank or any other part of this equipment:
Assemble the tank components in accordance with the instructions contained in this user manual. Do not drill into the tank or weld any
attachments to it. Do not alter the design by any means or use the equipment for any other use than it is intended.
Only use approved attachments parts and components:
Use only accessories supplied with this equipment and assembled as shown in these instructions. Do not use non-compatible accessories or re-
placement parts. Contact your nearest authorised Jefferson dealer for advice or telephone
+44 (0) 1244 646 048
for advice.
Check pressure tank and accessories for damage and correct assembly before use:
Never use this equipment if it is damaged in anyway. Never try to repair a broken part - contact your nearest authorised Jefferson dealer for advice.
Ensure that the equipment is cleaned thoroughly after use and maintained regularly:
Clean and dry the equipment after each use to prevent blockages caused by dirt and debris. Ensure that the ports to the safety valve gauge and
outlet are free of hardened paint or other materials which could prevent free movement of air.
Do not adjust or remove the lid while the tank is under pressure:
Ensure that the air supply to the equipment is turned off then turn the regulator knob counter clockwise to relieve the air pressure before opening
the lid. Check that the tank is not under pressure by pulling the safety valve ring.
Do not use reactive chemicals:
Using reactive chemicals can damage the lid gasket and safety valve seal increasing the risk of equipment failure under air pressure. Do not use
halogenated hydrocarbon solvents with this system, which contains aluminium parts and may explode. Cleaning agents, coatings, paints, and
adhesives may contain halogenated hydrocarbon solvents. Don’t take chances, consult your material supplier to be sure. (e.g. methylene chloride
and 1,1,1 - Trichlorethane).
Do not over-tighten the lid clamps:
Over-tightening the clamps can cause weakening of the lid gasket and reduce the effectiveness of the system and increase the risk of accident. En-
sure that the lid gasket is kept clean to avoid leakage. If the gasket is worn or damaged replace it before use, contact your nearest Jefferson Dealer
for details.
2. Box Contents :
Before assembling and using this equipment please ensure that all the items are included in the box and free from damage.
1x
10L Paint Tank
1x
1.8mm Nozzle Spray Gun
1x
8m Black Paint Hose
1x
8m Red Air Hose
1x
Small Brush
2x
Assembly and Maintenance Spanners
1x
Manual
3. Description
This 10L Paint tank is equipped with an air regulator, pressure gauge, safety valve and fluid outlet. The maximum pressure is
8Opsi.
Please note:
This equipment is not designed for use with highly abrasive or corrosive materials or those containing rust which can damage internal
parts and increase the risk of product failure and personal injury.
