background image

NOTE FROM JEFF ROWLAND DESIGN GROUP 

 

elcome to the Jeff Rowland Design Group “family” and congratulations on your 
purchase of what is unquestionably one of the world’s finest axillary Power Supplies. 

With its combination of features such as precision electronic circuitry, exceptional efficiency, 
and accurately machined chassis components throughout, your 

MODEL PSU  

will offer you many 

years of musically satisfying enjoyment. 

Please take a few minutes to read the remainder of this Owner’s Manual before proceeding 
with the installation of the amplifier. A thorough understanding of the operational features 
will allow you to gain the maximum performance and ease of use for which this amplifier was 
designed.  

Please note that your 

PSU 

 serial number begins with the letters “PE”. Please include this 

number with any correspondence regarding your 

PSU 

. It has been my joy to create an audio 

component of enduring value that reflects the highest ideals of musical and artistic 
expression. It is my hope that these qualities will enrich your experience and pride of 
ownership. 

If you have any additional questions regarding the installation or operation of the 

MODEL PSU

please contact your authorized Jeff Rowland Design Group dealer or check the Jeff Rowland 
Design Group web site at: 

http://jeffrowlandgroup.com. 

Enjoy the music! 

 

Jeff Rowland 

President, Jeff Rowland Design Group 

PAGE   4

W

Summary of Contents for PSU













Reviews: