OUT 2 OFFSET.
Adjusts the input gain offset of the unbalanced (RCA)
OUT 2
output
relative to the balanced (XLR)
MAIN OUTPUTS
1
and
2
by turning the
VOLUME
knob
clockwise or counter-clockwise.The balance bar graph will indicate any degree of
adjustment in 0.5dB increments when this mode is selected. When the cursor is returned
to center and resumes its diamond shape, no
OUT 2 OFFSET
adjustment has been made.
Any
OUT 2 OFFSET
adjustment is automatically stored in the preamplifier internal memory
until adjusted to a new value. Up to a maximum of +/-20dB offset can be achieved.
RECORD OUT LEVEL.
Adjusts the level (volume) of the record signal path.
NAME
−
. . . . .
A variety of names for labeling the Main and Record Inputs is provided.
The name chosen is assigned to the last-selected Main or Record Input.
REMOTE DEFAULT.
Returns IR receiver frequencies to factory default setting, thereby
matching the handheld remote transmitter transmission frequencies when adjusted to
factory default setting.
REMOTE ALT 1,2, AND 3.
Sets IR receiver frequencies to match handheld remote
transmitter transmission frequencies when adjusted to corresponding transmitting
frequencies.
DISPLAY HIGH/MEDIUM/LOW.
Adjusts the brightness of the display in three levels.
DISPLAY ON.
Cancels
DISPLAY OFF 5
s
/15
s
modes and returns the display to the
DISPLAY HIGH
brightness setting.
DISPLAY OFF 5
s
. The display remains off during normal operation, and is temporarily
activated for 5 seconds whenever any command is issued through the front panel or the
handheld remote transmitter.
DISPLAY OFF 15
s
. The display remains off during normal operation, and is temporarily
activated for 15 seconds whenever any command is issued through the front panel or
handheld remote transmitter.
FACTORY DEFAULT.
Return all preamplifier settings to factory defaults.
CORUS PREAMPLIFIER FIRMWARE REVISION NUMBER.
Indicates current version of
CORUS PREAMPLIFIER
operating system software.
15
