Jeep Renegade, Owner'S Handbook Manual

Page: 189 / 212

USB/iPod/AUX SUPPORT
Versions with Uconnect 5" Radio :
the vehicle has a USB/AUX port located
on the central tunnel.
Versions with Uconnect 5" Radio
Nav
: the vehicle has a USB/AUX port
located in the centre tunnel and a USB
port located inside the front armrest.
RADIO MODE
After the desired radio station is
selected on the display (see fig. 161),
the following information is shown:
At the top : the list of radio stations
stored (preset) is displayed; the station
being listened to is highlighted.
In the middle : display of the name of
the current radio station and the
buttons (
/ ) for selecting the
previous or next radio station.
At the bottom : display of the following
buttons:
❒
"Browse": list of the radio stations
available;
❒
"AM/FM", "AM/DAB", "FM/DAB":
selection of the desired frequency band
(button reconfigurable according to
the band selected: AM, FM or DAB);
❒
"Tune" : manual radio station tuning
(not available for DAB radios);
❒
"Info": additional information on the
source being listened to;
❒
"Audio": access to the "Audio
setting" screen.
Audio menu
The following adjustments can be
carried out using the "Audio" menu:
❒
"Equaliser" (where provided);
❒
"Balance/Fader" (left/right and
front/rear sound balance adjustment);
❒
"Volume/Speed" (excluding versions
with Hi-Fi system) speed-dependent
automatic volume adjustment;
❒
"Loudness" (where provided);
❒
"Auto-On Radio" (selects the radio
operation when the ignition device
is turned to MAR).
MEDIA MODE
With Media mode active, briefly press
buttons
/ to play the
previous/next track or keep buttons
/ pressed to fast rewind/
forward the track.
Track selection (Browse)
NOTE For languages not supported by
the system which feature special
characters (e.g. Greek), the keyboard is
not available. In these cases this
function will be limited.
Bluetooth ® SOURCE
Pairing an audio device Bluetooth®
To pair a Bluetooth ® audio device,
proceed as follows:
❒
activate the Bluetooth ® function on
the device;
❒
Press the MEDIA button on the front
panel;
❒
if the "Media" source is active, press
the "Source" button;
❒
select the Bluetooth ® Media
source;
❒
press the "Add Device" button;
❒
search for Uconnect
™
on the Blue-
tooth ® audio device (during the pairing
stage a screen is displayed showing the
progress of the operation);
161
J0A2500C
187