Jeep Renegade, Owner'S Handbook Manual

Page: 133 / 212

❒
slowly rotate the screw anticlockwise,
until resistance is encountered (do not
overtighten);
❒
slowly release the screw;
❒
opening is indicated by the entire
screw head coming out of its housing;
❒
remove cover B fig. 126, sliding it
completely upwards, as indicated in the
figure.
The number identifying the electrical
component corresponding to each fuse
is shown on the cover. After replacing
a fuse, make sure that you have closed
cover B correctly.
Fitting fuse box cover and
locking screw
Proceed as follows:
❒
fix cover B fig. 126 to the box
correctly, sliding it down completely
from the top;
❒
fully tighten screw A fig. 126, using
the dedicated screwdriver provided;
❒
slowly rotate the screw clockwise,
until resistance is encountered (do not
overtighten);
❒
slowly release the screw;
❒
closure is indicated by the securing
of the entire screw head in its housing.
DASHBOARD FUSE BOX
The fuse box fig. 127 is located near
the left side of the steering column and
the fuses can be accessed easily from
the lower part of the dashboard.
For fuse replacement, contact a Jeep
Dealership.
LUGGAGE
COMPARTMENT FUSE
BOXES
To access the fuses operate in the point
shown by the arrow and remove flap A
fig. 128.
126
J0A0116C
128
J0A0113C
127
J0A0114C
131