Jeep Renegade, Owner'S Handbook Manual

Page: 129 / 212

❒
turn anticlockwise (on the left device)
or clockwise (on the right device) and
remove the bulb and bulb holder
assemblies fig. 111: D = side
lights/daytime running lights (DRLs), E =
direction indicators;
❒
replace the blown bulb: to remove
the bulb, press on it gently (1 fig. 112)
and at the same time turn it
anticlockwise (2);
❒
insert the new bulb, by pressing it fig.
112 and turning it clockwise, making
sure that it locks correctly;
❒
then insert the bulb and bulb holder
units in their respective housings and
turn them anticlockwise (right side) and
clockwise (left side), ensuring that
they are locked correctly;
❒
reconnect the electrical connectors;
❒
finally, refit flap B fig. 109, completely
tightening fixing screws A.
Fog lights
To replace the bulbs proceed as
follows:
❒
steer the wheels completely;
❒
using the screwdriver, undo screws A
fig. 113 and remove flap B;
❒
using tab C fig. 114, remove
electrical connector D;
❒
turn the bulb and bulb holder
assembly E fig. 114 anticlockwise and
then replace the bulb;
❒
fit the new bulb and bulb holder
assembly, ensuring that it locks
correctly;
❒
reconnect the electrical connector;
❒
finally, refit flap B fig. 113, completely
tightening fixing screws A.
Side direction indicators
Side direction indicators on door
mirrors
(where provided)
For bulb replacement, contact a Jeep
Dealership.
Rear upper light cluster
This contains the bulbs for the side
lights, brake lights and direction
indicators.
111
J0A0263C
112
J0A0264C
113
J0A0211C
114
J0A0301C
127