Jeep GRAND CHEROKEE L 2023, Owner'S Manual

Page: 69 / 424

GETTING TO KNOW YOUR VEHICLE 67
Max A/C Button
Press and release to change the current
setting. The MAX A/C indicator
illuminates when MAX A/C is ON.
Performing this function again will cause
the MAX A/C operation to switch into manual mode
and the MAX A/C indicator will turn off. Pressing
other setting buttons will also cause the MAX A/C
to turn off.
MAX A/C sets the control for maximum cooling
performance.
NOTE:
The MAX A/C button is only available on the touch -
screen.
A/C Button
Press and release the button on the
touchscreen or push and release the
button on the faceplate to change the
current setting. The A/C indicator
illuminates when A/C is on.
Recirculation Button
Press and release the Recirculation
button on the touchscreen or push and
release the button on the faceplate to
change the system between recirculation
mode and outside air mode. Recirculation can be
used when outside conditions such as smoke,
odors, dust, or high humidity are present.
Recirculation can be used in all modes.
Recirculation may be unavailable if conditions
exist that could create fogging on the inside of the
windshield. The A/C can be deselected manually
without disturbing the mode control selection.
Continuous use of Recirculation mode may make
the inside air stuffy and window fogging may occur.
Extended use of this mode is not recommended.
Recirculation mode may automatically adjust to
optimize customer experience for warming,
cooling, dehumidification, etc.
In cold weather, use of Recirculation mode may
lead to excessive window fogging. The
Recirculation feature may be unavailable if
conditions exist that could create fogging on the
inside of the windshield.
AUTO Button
The AUTO button automatically controls
the interior cabin temperature by
adjusting distribution and amount of
airflow. Air Conditioning (A/C) may be
active during AUTO operation to improve
performance. Performing this function will cause
the system to switch between manual mode and
automatic modes
Ú
page 72. AUTO mode is highly
recommended for efficiency.
MAX Defrost Button
Push the MAX Defrost button to change
the current airflow setting to Defrost
mode. The indicator illuminates when
this feature is on. Performing this function will
cause the automatic climate controls to change to
manual mode, and the following settings will occur:

The blower speed increases to full (all LEDs on)

The rear blower is off

The air conditioning compressor is turned on
(A/C LED off)

Both driver and passenger temperature controls
are set to HI

Defrost mode is selected (LED on)

Rear defroster is turned on (LED on)

The air recirculation is turned off (LED off)
If MAX Defrost mode is turned off, the Climate
Control system will return to the previous setting.
MAX Defrost automatically turns off after
20 minutes.
Rear Defrost Button
Press and release the button on the
touchscreen, or push and release the
button on the faceplate, to turn on the
rear window defroster and the heated
outside mirrors (if equipped). The Rear Defrost
indicator illuminates when the rear window
defroster is on. The rear window defroster
automatically turns off after 10 minutes.
2
23_WL_OM_EN_USC_t.book Page 67