GETTING TO KNOW YOUR VEHICLE
67
WINDOWS
Power Window Controls
The window controls on the driver's door control
all the door windows.
Power Window Switches
There are single window controls on each
passenger door trim panel, which operate the
passenger door windows. The window controls
will operate only when the ignition is in the ACC
or ON/RUN position.
If equipped, the key fob may also be used to
raise or lower vehicle windows while the ignition
is in the OFF position. Refer to “Keys” in this
chapter for further information.
NOTE:
The power window switches will remain active
for up to 10 minutes after the ignition is placed
in the OFF position. Opening either front door
will cancel this feature. The time is program
-
mable. Refer to “Uconnect Settings” in “Multi
-
media” for further information.
Auto-Down Feature
The driver door power window switch and the
front and rear passenger door window switches
have an Auto-Down feature.
Push the window switch down for half a second
and release. The window will go down
automatically.
To stop the window from going all the way down
during the Auto-Down operation, pull up or push
down on the switch briefly.
To open the window part way (manually), push
the window switch down briefly and release.
Cool & Humid
Conditions
Set the mode control
to position and
turn on to keep
windows clear.
Cold Weather
Set the mode control
to the position. If
windshield fogging
starts to occur, move
the control to the
position.
WEATHER
CONTROL
SETTINGS
WARNING!
Never leave children unattended in a vehicle,
and do not let children play with power
windows. Do not leave the key fob in or near
the vehicle, or in a location accessible to
children, and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-Go in
the ACC or ON/RUN mode. Occupants,
particularly unattended children, can become
entrapped by the windows while operating
the power window switches. Such entrapment
may result in serious injury or death.
2
20_WK_OM_EN_USC_t.book Page 67
