194
STARTING AND OPERATING
MANUAL (M) OR SPORT (S) — IF EQUIPPED
The MANUAL (M, +/-) or SPORT (S, +/-) position
(beside the DRIVE position) enables full manual
control of transmission shifting (also known as
AutoStick mode; refer to “AutoStick” in this
chapter for further information. Toggling the
gear selector forward (-) or rearward (+) while in
the MANUAL or SPORT (AutoStick) position will
manually select the transmission gear, and will
display the current gear in the instrument
cluster.
Transmission Limp Home Mode
Transmission function is monitored
electronically for abnormal conditions. If a
condition is detected that could result in
transmission damage, Transmission Limp
Home Mode is activated. In this mode, the
transmission may operate only in certain gears,
or may not shift at all. Vehicle performance may
be severely degraded and the engine may stall.
In some situations, the transmission may not
re-engage if the engine is turned off and
restarted. The Malfunction Indicator Light (MIL)
may be illuminated. A message in the
instrument cluster will inform the driver of the
more serious conditions, and indicate what
actions may be necessary.
In the event of a momentary problem, the
transmission can be reset to regain all forward
gears by performing the following steps:
NOTE:
In cases where the instrument cluster message
indicates the transmission may not re-engage
after engine shutdown, perform this procedure
only in a desired location (preferably, at an
authorized dealer).
1. Stop the vehicle.
2. Shift the transmission into PARK (P), if
possible. If not, shift the transmission to
NEUTRAL (N).
3. Push and hold the ignition switch until the
engine turns OFF.
4. Wait approximately 30 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the
problem is no longer detected, the
transmission will return to normal
operation.
NOTE:
Even if the transmission can be reset, we
recommend that you visit an authorized dealer
at your earliest possible convenience. An autho
-
rized dealer has diagnostic equipment to
assess the condition of your transmission.
If the transmission cannot be reset, authorized
dealer service is required.
When To Use TOW Mode — If Equipped
When driving in hilly areas, towing a trailer,
carrying a heavy load, etc., and frequent
transmission shifting occurs, select TOW mode,
using the rotary switch on the center console.
Selecting TOW mode will improve performance
and reduce the potential for transmission
overheating or failure due to excessive shifting.
Refer to “Selec-Track” in this chapter for further
information.
20_WK_OM_EN_USC_t.book Page 194