Jeep Cherokee 2009, Operating Information Manual

Page: 54 / 223

when you talk in a normal conversational tone,
as if speaking to someone sitting a few feet/
meters away from you.
Voice Command Tree
Refer to “Voice Tree.”
Help Command
If you need assistance at any prompt, or if you
want to know your options at any prompt, say
"
Help
"
following the beep. The UConnect
!
system
will play all the options at any prompt if you ask for
help.
To activate the UConnect
!
system from idle, sim-
ply press the “Phone” button and follow the au-
dible prompts for directions. All UConnect
!
sys-
tem sessions begin with a press of the “Phone”
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
"
Cancel
"
and you will be returned to the main
menu. However, in a few instances the system will
take you back to the previous menu.
Pair (Link) UConnect
!
System to a Cellular
Phone
To begin using your UConnect
!
system, you must
pair your compatible Bluetooth
!
enabled cellular
phone (refer to “Introduction” section to learn
about the phone type).
To complete the pairing process, you will need to
reference your cellular phone owner’s manual.
The UConnect
!
website may also provide de-
tailed instructions for pairing.
The following are general phone to UConnect
!
system pairing instructions:
•
Press the “Phone” button to begin.
•
After the
"
Ready
"
prompt and the following
beep, say
"
Setup Phone Pairing.
"
•
When prompted, after the beep, say
"
Pair a
Phone
"
and follow the audible prompts.
•
You will be asked to say a four-digit Personal
Identification Number (PIN), which you will later
need to enter into your cellular phone. You can
enter any four-digit PIN. You will not need to
remember this PIN after the initial pairing pro-
cess.
•
For identification purposes, you will be
prompted to give the UConnect
!
system a
name for your cellular phone. Each cellular
phone that is paired should be given a unique
phone name.
•
You will then be asked to give your cellular
phone a priority level between 1 and 7, with 1
being the highest priority. You can pair up to
seven cellular phones to your UConnect
!
sys-
tem. However, at any given time, only one
cellular phone can be in use, connected to your
UConnect
!
system. The priority allows the
UConnect
!
system to know which cellular
phone to use if multiple cellular phones are in
the vehicle at the same time. For example, if
priority 3 and priority 5 phones are present in
the vehicle, the UConnect
!
system will use the
priority 3 cellular phone when you make a call.
You can select to use a lower priority cellular
phone at any time (refer to
"
Advanced Phone
Connectivity
"
).
Dial by Saying a Number
•
Press the “Phone” button to begin.
•
After the
"
Ready
"
prompt and the following
beep, say
"
Dial.
"
•
The system will prompt you to say the number
you want to call.
•
For example, you can say
"
151-1234-5555.”
•
The UConnect
!
system will confirm the phone
number and then dial. The number will appear
in the display of certain radios.
Call by Saying a Name
•
Press the “Phone” button to begin.
•
After the
"
Ready
"
prompt and the following
beep, say “Call.
"
51