Fig. 16: Start Mount/Dismount Tool Within 10 Degrees Of Valve Stem
Courtesy of CHRYSLER GROUP, LLC
3. Dismount tire from wheel following tire changer manufacturers instructions
while paying special attention to the following to avoid damaging the
pressure sensor:
a. When breaking the tire bead loose from the wheel rim, avoid using the
Bead Breaker in the area of the sensor (1). That includes both outer and
inner beads of the tire.
b. When preparing to dismount the tire from the wheel, carefully insert the
mounting/dismounting tool 280° from the valve stem ± 10°, then
proceed to dismount the tire from the wheel. Use this process on both
outer and inner tire beads.
2014 Jeep Patriot Limited
2014 SUSPENSION Tires & Wheels - Service Information - Compass & Patriot
Tuesday, July 19, 2016 10:01:58 AM
Page 27
27
