Jeep 2009 Wrangler Owner'S Manual Download Page 90

Page: 90 / 496

The restraints may be raised without pushing in the
button. The rear head restraints are not adjustable.

Fold and Tumble Rear Seat — Two Door Models

NOTE:

•

Prior to folding the rear seat, it may be necessary to
reposition the front seats.

•

Be sure that the front seats are fully upright and
positioned forward. This will allow the rear seat to
fold down easily.

1. Lift the seatback release lever and fold the seatback
forward.

Adjustable Head Restraints

Rear Seat Release

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 Wrangler

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2009 Wrangler, Owner'S Manual

Search results

Summary of Contents for 2009 Wrangler

Reviews:

Brands by name

Popular brands