Jeep 2009 Wrangler Owner'S Manual Download

Page: 124 / 496

CAUTION! (Continued)

•

Careless handling and storage of the removable
door frame(s) may damage the seals, causing water
to leak into the vehicle’s interior.

•

The door frame(s) must be positioned properly to
ensure sealing. Improper installation can cause
water to leak into the vehicle’s interior.

Door Frame Removal — Two-Door Models

1. Unscrew and remove the door frame attachment
knobs (two per side).

WARNING!

Use both hands to remove the door frames. The door
frames will fold and could cause injury if both hands
are not used.

122

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 Wrangler

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Wrangler

Reviews:

Related manuals for 2009 Wrangler

Brands by name

Popular brands

Jeep 2009 Wrangler, Owner'S Manual

Search results

Summary of Contents for 2009 Wrangler

Reviews:

Related manuals for 2009 Wrangler

Brands by name

Popular brands