Jeep 2009 Wrangler Owner'S Manual Download Page 113

Page: 113 / 496

6. Reinstall the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion” later in this section.

Installing the Soft Top

NOTE:

The following procedures are for first time set

up only. For future soft top procedures, refer to “Soft
Top” in this section.

1. Locate and remove the following items prior to hard
top removal:

•

Right and left door frames

•

Door frame attachment knobs (four for two-door
models, six for four-door models)

•

Right and left quarter windows

•

Rear window

2. Remove the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal”
later in this section.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

111

Summary of Contents for 2009 Wrangler

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2009 Wrangler, Owner'S Manual

Search results

Summary of Contents for 2009 Wrangler

Reviews:

Brands by name

Popular brands