G
RAPHIC EQ, CONNECTORS
9
32.TAPE INPUTS JACK
Two unbalanced input, feeding the main stereo mix via stereo 1, 2 volume are ideal for pre-show from a CD or
tape player. You can also use them as extra effect returns or instrument input.
R
EAR PANEL CONTROLS
38.POWER INLET
For AC power supplying socket, connect AC power cord with safety.
Built in AC fuse in the socket.
( VOLTAGE : 220V/230V/240VAC - T0.5AL 250V, 120VAC - T1A 250V )
33.RECORD OUTPUTS
This is output jack for recording of main mix L/R output level is 0dB(0.775V).
34.GRAPHIC EQ IN/OUT JACKS
This is for amplification of external signal via EQ IN/OUT for the details refer to patch connection drawing.
35.EXTERNAL POWER AMP INPUTS (LEFT/RIGHT)
This is input jack from external mixer for the details refer to patch connection drawing.
36.MAIN MIX OUTPUTS (LEFT/RIGHT)
This is to supply signal with external amplifier for bigger PA for the details refer to connection drawing.
37.POWER SECTION
MAIN POWER SWITCH
Pressing switch "on" will make the power indicating GREEN LED on and supply the power.
PHANTOM POWER SWITCH (48V in globally)
When using condenser microphones pressing switch on, XLR connector of all mono microphones will be
supplied as a group.
WARNING :
Before switch "on", adjust volume to counter-clockwise and channel fader to
※
SERIAL NO.:
POWER CONNECTOR
1
2
4
3
1: 24VAC
3: 24VAC
4:
2: COM
38
