8
e)
Manufacturer’s and user’s responsibilities
1.
Follow all advice contained in this manual concerning levels of knowledge, installation
procedures, operation, adjustment, maintenance and repair.
2.
Only use spare parts and accessories that comply with the manufacturer’s
recommendations.
3.
Do not carry out any modifications yourself and do not allow others to modify your
equipment and its accessories (mechanical, electrical, hydraulic or pneumatic
characteristics) without requesting prior written approval from the manufacturer.
4.
Failure to comply with these requirements may make the machinery dangerous. The
manufacturer disclaims any responsibility if damage or injury arises from such action.
5. Technical characteristics
1 Dimensions of variants:
Mounted
-
FP MAX = maximum push force (daN)
-
FT MAX = maximum tractive force (daN)
C.D.G
En charge maxi
3
rd
upper point
25 mm dia. shaft
MAX WEIGHT = Kg
daN
F.P. MAX
F.T.
MAX
daN
2 lower points 28 mm dia.
shaft
3-point linkage, Category 2
NFU 14-032 / ISO 730
C of G
at maximum load
