26
1-
Our spreaders will give reliable and satisfactory service if used within their normal
limits.
2-
Never exceed the maximum load indicated on the manufacturer plate.
3-
Before loading the spreader when it is used for the first time and every time it is
used after a period of inactivity, operate the moving floor so that it goes round once.
4-
In case of frost, check that the guillotine door is working (option).
2).
Loading.
1-
Place the equipment next to the heap.
2-
Before leaving the tractor, engage the handbrake, stop the engine.
3-
Get in the tractor equipped with the loader
to carry out the loading
. If this
operation is carried out by another person, do not stand in the loading area.
4-
For a regular spreading, load the body uniformly.
3).
Spreading.
- Activating the spreading system (shredding spreading table)
Start the PTO.
- Moving floor operation, adjustment of moving floor speed and other functionalities:
Use the electric unit located in the driving station and provided with the spreader, in order to
start or stop the moving floor, adjust its speed, open or close the heavy slurry door or activate
any other systems available on the spreader.
(Refer to the diagram of the electric unit below, in order to visually identify each
available function)
Meter
Beater safety
Selector
Side shutter
Rear cover
Door
Moving floor
Flow divider
