background image

 

2

E-mail: 

[email protected]

 – Web site: 

www.jeantil.com

 

 

1.

 

Aim of the Instruction Manual 

 
 

1).

 

General 

 

ƒ

 

The manual concerns all users of the equipment and any person responsible for 
assembling, installing, operating, adjusting, servicing, repairing or transporting 
the equipment and its accessories. 

ƒ

 

The manual contains practical information for the correct and safe operation, 
handling, adjusting and maintenance of your equipment. 

ƒ

 

Read carefully and ensure you understand the content before using the 
equipment. Comply with the instructions and the safety-related advice. 

 

 

2).

 

Warning symbols 

 
 

 

 

This warning symbol identifies important advice that must be followed for 

your safety. When you see this symbol, be aware that there is a potential risk of injury; 
read carefully the advice that follows it and inform other users. 

 
 

3).

 

Keeping the manual 

 

Always keep this manual within easy reach or at your place of work (or 

operating site).  
Pass it on to any other user, including if you lend or sell the equipment. 

 
 

4).

 

Contact details (customer service) 

 

JEANTIL 
 Rue de la Tertrais 
ZI La Hautière  BP1 
35590 L’HERMITAGE  France 
Tel: 00 33 (0)2.99.64.04.04 
Fax: 00 33 (0)2.99.64.19.56 
Spare parts shop tel: 00 33 (0)2.99.64.04.02 
Spare parts shop fax: 00 33 (0)2.99.64.09.36 
E-mail: 

[email protected]

 – Website: 

www.jeantil.com

 

 
 
 
 
 

Summary of Contents for EPR 23-16



































Reviews: