Jeanneau SUN ODYSSEY 41 DS Owner'S Manual Download

Page: 34 / 188

- 34 -

137132

Index B

5.8 GENOA FURLER

Operation

- Leave several turns of the furling line around the drum.

- Furl/unfurl the genoa slowly so that the furling line is always under light tension thus avoiding
any riding turns in the drum.

- Never slacken the genoa halyard when furling/unfurling the sail.

- When furling in light winds, it is recommended to keep the sheet under slight tension so that
the genoa furls correctly.

Maintenance

- Rinse the furling drum regularly.

- It is recommended to rinse mechanical parts at least once a year in fresh water.

Refer to the manufacturer's instructions for use and maintenance.

Summary of Contents for SUN ODYSSEY 41 DS





























































































































































































Search results

Summary of Contents for SUN ODYSSEY 41 DS

Reviews:

Related manuals for SUN ODYSSEY 41 DS

Brands by name

Popular brands

Jeanneau SUN ODYSSEY 41 DS, Owner'S Manual

Search results

Summary of Contents for SUN ODYSSEY 41 DS

Reviews:

Related manuals for SUN ODYSSEY 41 DS

Brands by name

Popular brands