Jeanneau SUN ODYSSEY 41 DS Owner'S Manual Download

Page: 26 / 188

- 26 -

137132

Index B

5.3 RUNNING RIGGING

- Inspect the halyards for wear and condition.

- Regularly check the condition of the jam cleat jaws.

- Regularly clean the backstay blocks with fresh water.

- Avoid aggressive gybing in order to reduce premature wear on the sheets, attachment points
and the gooseneck.

- If halyard tension (mainsail/genoa) is too great, this can lead to problems when hoisting/
furling.

- When not sailing, slacken the genoa halyard and keep it away from the
forestay (risk of halyard becoming furled around the forestay, which can lead
to the stay breaking and dismasting of the boat).

Summary of Contents for SUN ODYSSEY 41 DS





























































































































































































Search results

Summary of Contents for SUN ODYSSEY 41 DS

Reviews:

Related manuals for SUN ODYSSEY 41 DS

Brands by name

Popular brands

Jeanneau SUN ODYSSEY 41 DS, Owner'S Manual

Search results

Summary of Contents for SUN ODYSSEY 41 DS

Reviews:

Related manuals for SUN ODYSSEY 41 DS

Brands by name

Popular brands