Jeanneau sun odyssey 33I, Owner'S Manual, Page: 91 / 136

87/132
OPERATION
Waste water from the sink, washbasins and heads is drained off by thru-hull fittings with ball valves (the
valve is closed when the valve handle is perpendicular to the hose, the valve is open when the valve
handle is in line with the hose).
All the floors have holes (limber holes) for the water flow.
A watertight bilge tray under the engine receives the possible oil leaks.
A main sump located above the ballast receives water from the bilges.
.The main sump is partially drained by an electric or a manual pump. Regularly dry the sump with a
sponge.
PIECE OF ADVICE - RECOMMENDATION
- Regularly check the valves and thru-hull fittings for proper operation and watertightness.
- Turn off the valves when the water system is not in use.
- Visually check the water pump flow.
- Check the clamps and flexible hose connections for tightness.
- Pay attention to the seals for condition.
- Regularly make sure that the strum box and bilge are perfectly clean.
- Immediately switch off the electric system in case a pump is running while all the water supplies
are turned off.
- In case of a leak check the system.
8
WATER AND SEWAGE WATER