manualshive.com logo in svg

Jeanneau sun odyssey 33I, Owner'S Manual, Page: 44 / 136

Share
Download
Jeanneau sun odyssey 33I Owner'S Manual Download Page 44

40/132

NAVIGATION

NAVIGATION - DECK LAYOUT

- A. Mooring cleats

• Life-lines (attached to anchoring cleats or to optional chains)

- B.  Towing:

• at the bow, to be towed

• at the stern, to tow

- C. Swimming ladder (means of coming back onboard)
- E. Ring lifebuoy bracket
- F. Mount Outboard - Maximum weight of outboard engine (not supplied): 20 kg

DANGER

- Wear your life jacket.
- In heavy weather, wear your safety harness and fasten yourself to the boat.
- When at sea close the guardrail doors.
- Do not try to stop the boat using a boat hook or your foot, your hand or any other 

part of the body.

WARNING

The sudden closing of a locker due to a gust of wind or movement of the boat could 

result in injury.

PIECE OF ADVICE - RECOMMENDATION

Close the deck hatches and fore portholes each time before each trip (including the companionway 

hatch in heavy weather).

Summary of Contents for sun odyssey 33I









































































































































Reviews:

No comments