manualshive.com logo in svg

Jeanneau sun odyssey 33I, Owner'S Manual, Page: 103 / 136

Share
Download
Jeanneau sun odyssey 33I Owner'S Manual Download Page 103

99/132

BATTERY SWITCH

The electricity onboard is 12 V DC.

The electrical system consists of service batteries.

The batteries supply power to all the functions on board.

The engine has its own battery.

Switch on the electricity by turning the positive and negative battery switches (12 V).

BATTERY SWITCH -

AFT CABIN

1. + Engine
2. - Common
3. + Service

WARNING

- Never work on a live electric fitting.
- Do not touch battery terminals, risk of electric shock.

PRECAUTION

- Switch off the electrical system with the battery switches when the boat is unattended.
- Never leave the vessel unattended with the mains electricity switched on.
- Turn off the electrical system with the battery switches and circuit breakers before gaining access 

to the rear of the electrical panels.

- Check the level of maintainable lead batteries.

PIECE OF ADVICE - RECOMMENDATION

- It is recommended that you switch off all electrical devices before turning off the battery switches.

9

ELECTRICAL EQUIPMENT

Summary of Contents for sun odyssey 33I









































































































































Reviews:

No comments