Jeanneau PRESTIGE 32, Owner'S Manual

Page: 78 / 96

Refer to the brochure supplied with the boat.
You must read carefully the brochure which includes detailed hints about the engine ope-
ration and how to run it properly.
ACCESS TO THE ENGINE :
Access to the engine via the saloon hatches.
ENGINE SEA VALVE :
The engine sea valve ensures a critical duty in the engine operation and, therefore, the
strainer must be brushed whenever the ship is docked and kept clean and free from clog-
ging or anti-fouling paint.
The sea valve must be open before starting the engine, otherwise the exhaust and the
engine may incur severe damages.
RECOMMENDATIONS
Good practice requires to check if water is expelled together with the exhaust gases,
immediately after starting the engine; otherwise, stop the engine immediately and
check the valve for cleanliness.
It’s not necessary to shut the valve after each use of the engine; on the other hand, this
is mandatory if the boat remains unmanned for a long period of time.
Check and clean the water filter regularly.
ENGINE OPERATION :
Before starting the engine :
- Open the fuel valve,
- Open the engine cooling valve,
- Actuate the battery master switch to energize the electrical system,
- Before starting the engine, disengage the reversing gear to acceleratefrom dead
stop,
- Refer to the engine manufacter ’s brochure before starting up the engine.
39
48
8
index 1
diesel engine
P R E C A U T I O N
P R E C A U T I O N
Never run the engine if the boat is dry-docked.
P R E C A U T I O N
P R E C A U T I O N
Stop the engine before you open the hatches
or keep away from the belts and moving parts.
Be careful with full clothes, long hair, rings that may get caught in them.
Wear appropriate clothes (gloves, cap, etc…).
ENGINE