Jeanneau PRESTIGE 32, Owner'S Manual

Page: 66 / 96

33
48
index 1
The electrical switchboard does not require any routine maintenance.
In case an electrical unit should not be energized, check :
- The main power supply (batteries, master switches),
- The switches and fuses along the line,
- The relevant electrical unit.
Use the automatic reset switch to read the fuel gauge, to obviate electrolytic problems.
As far as possible, use electrical appliances with a double insulation or three conductors
(Neutral - Phase - Earth).
Connect the casings or metallic cases of the fitted electrical appliances to the earth of the
boat : this conductor is green with yellow stripes.
W
W
A R N I N G
A R N I N G
Never work on a live electrical fitting.
P R E C A U T I O N
P R E C A U T I O N
Never leave the boat unattended when the electrical system is energized, except for
automatic switch bilge pump and protection circuits against fire or robbery.
Disconnect the 230V before opening the electrical switchboard.
P R E C A U T I O N
P R E C A U T I O N
Only a technician, skilled in marine electricity, is entitled to alter a fitting and
the relevant diagrams.
Never change or alter the amperage of the overcurrent safety devices.
Never install or replace the electrical appliances or equipments by components
exceeding the circuit amperage (Watt for bulbs).
OPERATION
230V CIRCUIT
wiring
7