Jeanneau Leader 40, Owner'S Manual

Page: 34 / 100

- 34 -
5.4.2 Bilge pumps and drainage
General points
- The inner moulding of the hull has channelling: the drainage channels. The drainage
channels allow the water to drain down to the lowest point in the boat, where it can be
discharged. So it is important to allow the water to flow freely down to this lowest point of the
boat, which includes.
- Regularly cleaning the lowest point of the boat and the drainage channels.
Diagram of the layout - Bilge pumps
Reference Designation Rate
1 Manual bilge pump 32p/minute (*)
2 Manual bilge pump lever
3 Electric bilge pump (All versions) 129p/minute
3’ Electric bilge pump x2 (Petrol version only) 129p/minute x2
4 Electric bilge pump switch
(*) 45 strokes/minute
If 70 stroke/minute: rate 35p/minute