Jeanneau LEADER 33 OUTBOARD, Owner'S Manual

Page: 172 / 198

- 172 -
197895 RCD-2
Index B
15.1.4 Solid wood on exterior wooden panelling
- Wood exposed to harsh conditions such as salty air and UV rays tends to become whiter and
to lose its natural colour. This phenomenon has no effect on the intrinsic qualities of the wood,
but can spoil its aesthetic appeal.
- To maintain the colour of the wood, regularly wash the woodwork in fresh water using a
sponge (if necessary, use a mild soap).
- It is recommended that you oil the external woodwork regularly using teak oil in order to
protect it from harsh conditions.
15.1.5 Exterior upholstery
- Bring the removable cushions inside (washed with soapy water then dried) when the vessel
is unoccupied.
- Put canvas sheets/protective covering over the fixed upholstery.
Maintenance
To maintain the quality of the fabric, spray regularly with clarified water and brush with a soft
brush (such as a clothes brush). A thorough clean every 2 years is recommended.
Stain removal
Follow these steps for routine cleaning:
- Remove as much debris as possible using a soft brush;
- Spray the fabric with water;
- Prepare a cleaning solution using mild soap and water (do not use detergent);
- Wash with a soft brush;
- Wait for the soap solution to act;
- Rinse thoroughly in fresh water;
- Dry in the open air.
ADVICE-RECOMMENDATION
Never use detergents, acetone or other harsh products on the wood.
- If the wind exceeds 20 knots, it is recommended that you stow all removable
protection sheets (Bimini, awnings...).
ADVICE-RECOMMENDATION
Never:
- use a heat source (hairdryer/clothes dryer);
- use detergent, silicone, acetone, chlorine-based products or hot water;
- use a high-pressure cleaner.