- 165 -
197895 RCD-2
Index B
Operation
- The boat's helsman must get used to the interceptor system in calm water before using it in
more severe weather conditions.
- The Zipwake system must only be used when underway : the skipper must shut it down when
the boat is in port, at anchor or out of the water.
- The system can also be controlled manually using a control wheel (Pitch for trim, Roll for roll).
Launching
- Before the boat is first launched and then on regular occasions, it is recommended that you
check each interceptor (see the specific menu for this on the control panel). All of the indicator
lights must be green for the system to be correctly used. Corrective measures are necessary
if a red indicator light is shown : for example, antifouling excess or damaged blades.
- Paint the interceptors with an antifouling spray. When the paint is dry, operate the interceptor
blades with the controls to ensure that they more freely, with no play or sticking.
Maintenance
- It is recommended that you withdraw/extend the interceptor blades regularly to prevent the
formation of deposits on the inner faces.
Lift-out/careening
- Check that no object is resting against the interceptors when the boat is on the cradle.
- Deploy the blades fully with the controls and clean them with a pressure washer.
- The Zipwake flaps affect the boat's ability to hold its course : the helmsman
must be attentive when driving the boat, which remains his/her sole
responsibility.
- Never touch the interceptor blades by hand : the edges are sharp. To
withdraw/extend the Interceptor blades, always use the controls on the
steering station.
- The automatic control function switches off when no GPS signal is present.
13
ENGINE
Summary of Contents for LEADER 33 OUTBOARD
