JDS Uniphase Wavetek DSAM-3500B, Quick Start Manual

Page: 42 / 88

Chapter 2 DSAM Meter Operation
Configuring the Meter
26 DSAM Product Family Quick-Start Guide Rev. 001
Measurement
Configuration
To view the Configure Measure menu ( Figure 12 on
page 26 ), press the Configure mode key ( Figure 5 on
page 18 ), then press the Measure softkey.
Use measure configuration to specify:
– sweep settings
– limit sets
– DOCSIS® throughput
– FDR settings
– other (measurement) settings, such as the roving
MAC address for cable modem tests
– VoIPCheck
– test point compensation
– loopback reference
Channel Plan
Configuration
A CATV system is comprised of channels representing the
channel plan for that system. Each channel is identified by
its carrier type, frequency, and other parameters. The
Figure 12 Configure Mode Measure Menu