JDS Uniphase Wavetek DSAM-3500B, Quick Start Manual

Page: 31 / 88

Chapter 2 DSAM Meter Operation
Powering the Meter
DSAM Product Family Quick-Start Guide Rev. 001 15
The green “OK” LED illuminates to indicate that the battery
is completely charged.
The red “CHARGE” LED illuminates to indicate the
present charge condition. Under normal charging condi-
tions, this LED should remain on constantly. A flashing
LED is indicative of a fault condition. To interpret the
“CHARGE” LED indications, review
Table 6 .
For information about the charger module’s specifications,
see
Table 9 on page 64 .
Figure 3 DSAM Battery
Table 6 Charge LED indications
LED color State
Battery and charge
condition
Red
(CHARGE) Steady Charging
Flashing Charge fault check:
– Temp too high/low or,
– DC too high/low or,
– Internal fault
Green (OK) Steady Charge Complete
Charge
Indicator
LEDS
12 Volt
DC Port