JDSU
ORL-55
43
6 M
EMORY
M
ANAGEMENT
Selecting the store location
When you press the
[Store]
key in measurement mode,
the results are stored at the active memory location.
Each time you press the key, the Meas # is incremented
but the Group # remains the same. You cannot select the
memory location, Meas # or Group # in measurement
mode.
If you do not want to overwrite existing data or if you
want to set a specific Group and Meas number, you must
open the MANAGE MEMORY menu and select the
location.
The procedure is the same as for displaying a memory
location (see
„Displaying stored results” on page 41
), as
the last memory location displayed is always set as the
current memory location when storing data.
To save results at a selected location:
1. Set the wavelength and measurement mode as
required.
2. Select
Manage Memory
in the MAIN menu.
3. Press
[
]
to edit the Meas # only.
Go to step 9 if you only want to edit the Meas #.
4. Press
[MENU ENTER]
.
The MANAGE MEMORY menu opens.
5. Press
[MENU ENTER]
again (
Select Group
is
highlighted).
The current Group # and Meas 001 are displayed.
6. Press
[
]
to edit the Group #.
7. Press
[MENU ENTER]
.
Meas # is
highlighted.
8. Press
[
]
to edit the Meas #.
9. Press
[PREV]
to exit from the menu.
Press
[Store]
to store the results.
