JDS Uniphase HST-3000 OLP-3057, User Manual

Page: 47 / 54

Chapter 4 Test Results
Graphs
HST-3000 OLP-3057 Optical Power Meter User’s Guide
29
Graphs
The graphs provide a graphical representation of each input.
The inputs can be displayed with all three on one screen, as
shown in
Figure 6 , or individually, as larger graphs. Press the
up or down key to access the larger graphs.
Statistics
Table 8 describes the results on the Statistics screen.
Figure 6 Example of graphic results
Table 8 Statistics results
Result Description
Usage Reports the current, maximum, and mini-
mum values for each wavelength. LOW indi-
cates the signal is too weak to be measured.
Pass/Fail
results Report the percentage of the wavelength
that meets each criteria of the threshold
mask.
NOTE: This result only appears in FTTx
mode.