Chapter 9
Measure Mode – Service Tab
VoIP
242
DSAM Help User Guide
Rev. 001
Selecting the
Settings Softkey
Options
To select the Settings softkey options
1
To display the Downstream Plans screen, use the arrow keys and
select
Channel Plans
.
2
Press
ENTER
.
OR
3
To display the Adjust Sounds screen, use the arrow keys and
select
Audio
.
4
Press
ENTER
.
Viewing VoIP MOS
Results
R-Value Listening, R-Value Conversational, MOS Listening, and MOS
Conversational values are computed using the packet loss, jitter and
delay results. These values are intended to give a quantitative assess-
ment of the call quality. The VoIP MOS screen enables you to place
and receive calls and measure these values.
To view VoIP MOS results
1
Press the
View
softkey.
2
Using the arrow keys, select
Call
.
3
Press
ENTER
.
NOTE
The limit set parameters you define remain constant for all channel
plans and measurement modes.
Figure 219
Measure Mode – VoIP Telephone Number
21128026 R001 DSAM Help User Guide.book Page 242 Thursday, February 5, 2009 2:02 PM
